二手 TEMPTRONIC TPO 4300A-8C32-4 #9196221 待售

ID: 9196221
优质的: 2007
Temperature source system RS232, IEEE, 10/100 Ethernet interface Temperature range: Standard head with arm or 2.4 m (8 ft) hose: -80° to +225°C (60 Hz system) -75° to +225°C (50 Hz system)³ Standard head, no arm with 1.2 m (4 ft) hose: -80° to +225°C (60 Hz system) -75° to +225°C (50 Hz system)³ Typical temperature transition rate (air): -55° to + 125°C: Approx. <5 seconds² 125° to -55°C: Approx. <13 seconds² System air flow output: 2.4 l/s to 9 l/s (5 to 18 scfm) Temperature accuracy: 1.0°C (When calibrated against NIST transfer standard) Temperature set, display and resolution: ± 0.1 Temperature Control: DUT Sensor ports: Internal diode Type T Type K thermocouple 100 ohm Platinum RTD DUT Control: Control to within ± 0.1° C Remote interface ports: IEEE-488, RS232C Serial Start test/end of test/stop on First Fail (ST/ET/SFF) Ethernet Features: (2) Modes of operation: Operator mode Cycling mode Purge flow capacity: 0.25 to 1.5 liters per second (0.5 to 3 scfm) airflow Manually adjustable Thermal head raising and lowering: Pneumatic control on thermal head Operated manually or via remote interface Head positioner movement: Manual locking (4 locks) 360° Head rotation Manipulator (arm) movement: Motorized raising and lowering of arm 330° Positioning range around the base unit Environmental and service features: Over temperature protection: + 235°C (Factory-set) Mobility: (4) Swivel caster wheels with locks (10.16 cm (4-inch) diameter) Rear handle for ease of transport Refrigerants: 50 Hz systems: HCFC-free and CFC-free, non-toxic, non-flammable 60 Hz systems: CFC-free, non-toxic, non-flammable Noise level: <65 dBA approximately Facility requirements: Power requirements: 200-240 VAC (230V nominal) 50 Hz, 30 Amp, 1 Phase 200-240 VAC (230V nominal) 60 Hz, 30 Amp, 1 Phase Compressed air requirements: Clean, dry air: Filtered to 5 micron particulate contamination Oil content: <0.01 ppm by weight filtered to .01 micron oil contaminant Dewpoint: <10°C @ 6.2 BAR (90PSI) Supply pressure: 6.2 to 7.6 BAR (90 to 110 PSIG) Supply flow at minimum: 7.2 l/s to 14.3 l/s (9 to 30 scfm) Supply pressure: Nominal 25 scfm Air supply temperature: +20° to +25°C (+22°C nominal) Operating temperature: +20° to +28°C (+23°C nominal) Humidity: 0 to 60% (45% nominal) 2007 vintage.
TEMPTRONIC TPO 4300A-8C32-4是现有的最好、最可靠的最终测试系统之一。它配备了4插槽数据采集模块(DAM)和8-Channel温度测试设备,使其成为一个高效且功能强大的系统。TEMPTRONIC TPO4300A-8C32-4 Unit具有坚固耐用的铝制底盘,温度范围为+25°C至+85°C。该测试机是为最终测试应用的最佳性能而设计的。TPO 4300A-8C32-4中的8-Channel测试工具可同时测试多达8个组件。它有一个集成的电压调节器,可以让静态测试快速准确地完成。TPO4300A-8C32-4具有强大的性能驱动功能,可实现最佳流程和生产力。为确保精确测量,该设备配备了用于双区域热分析的8通道测试仪资产、特殊工艺计时器和数据采集模块。这有助于确定温度漂移速率并提供温度稳定性控制。Labview软件提供了一个开放平台,可快速开发完整的测试解决方桉。它包括一个交互式图形程序,允许用户快速制定可定制的测试计划。该软件还集成了模型诊断和文档工具。此外,该软件还包含一个直观的诊断软件包,可轻松导航和识别潜在的测试问题。TEMPTRONIC TPO 4300A-8C32-4还具有集成的数字存储示波器。这样可以捕获最多50MHz个波形,最大采样率为10MS/s。此外,它还可以测量电流、电压和温度。TEMPTRONIC TPO4300A-8C32-4单元的通信功能包括以太网、USB、GPIB和RS 232输入。以太网连接允许远程监视运动、温度和设备警报。USB连接使用户能够将数据直接从"破烂"传输到PC,而Gpib连接允许与GPIB总线集成。RS 232连接用于TEMPTRONIC与外部设备之间的通信。TPO 4300A-8C32-4还具有最大耐用性,并有2年保修作为后盾。该系统是高精度最终测试和热分析应用的理想解决方桉。可用于电信、汽车、电子等行业。TPO4300A-8C32-4拥有强大的硬件和先进的软件,是最佳的最终测试系统之一。
还没有评论