二手 THERMONICS T-2420SX7-85 #9152009 待售
网址复制成功!
单击可缩放
ID: 9152009
THERMONICS T-2420SX7-85 Temperature forcing system
Voltage: 208-230 Volts
Frequency: 50/60 Hertz
Phase: 1
Current: 20 Amps
Method of Cooling: Forced air with single-stage mechanical refrigeration
Multistage self-cooling heat exchanger
Method of heating: Forced air with in-line air heaters
Operator interface: Twenty character alphanumeric display and keypad
Menu-driven software with self-diagnostics
Controls: Microprocessor control of all critical functions
Ambient temperature range:
Operating: 15°C to 28°C
Non-Operating: -40°C to +85°C
Relative humidity: 20 to 65%
Pressure:80-110 PSIG (5.7 to 7.8 Kg/cm2)
Flow rate: 10-16 SCFM (4.7-7.6 liters/sec)
Dew point: Less than 10C at 80 PSIG (5.7Kg/cm2)
Quality: Clean, dry air, free of oil, moisture and particles
Calibration: Automatic or manual
Up to 10 different applications may be calibrated independently
Stored in non-volatile memory
Temperature Sensor: Device under test (DUT)
K-type thermocouple Optional
T-type thermocouple
1000 ohm RTD for auto calibration
Controller: Microprocessor-based PID (Proportional, Integral, Differential) with
user control of DUT mass constant
Fail safes: Snap disc thermostats, air flow sensors and thermocouples
Over temperature limit of 235°C
Air dryer: Dries air to -70°C dew point
Air flow: 200 to 960 SCFH (1.6 to 7.6 liters/sec).
THERMONICS T-2420SX7-85最终测试设备旨在测试和分析各种电子元件。该系统由固态温度控制器与多通道电源开关单元组合而成,允许对被测设备进行精确的热控制。该机组固态温度控制器的温度范围为-40 °C至+85°C(-40 °F至+185°F),精度为+/-0.1°C。它配备了七个独立调节的通道,每个通道的最大输出功率为4.3kW。这种先进的热控制器还提供自动调整、微调、自动校准、过载保护、温度倾斜和报警报告。多通道电源开关单元用于对被测设备施加热应力。它有八个独立的产出,最多可提供130A的电流。机器还提供手动和自动控制电源开关,允许用户定制测试协议。T-2420SX7-85专为超高速测试和生产环境而设计。它支持广泛的设备被测试规范,包括SOA、COP、烧结和高电流测试。该工具还附带了用于同时记录测试数据的数据记录软件。THERMONICS T-2420SX7-85最终测试资产在测试和分析电子元器件时提供了精确和精确的性能。其综合特性使其成为任何测试和生产环境的理想选择。
还没有评论