二手 EDEX ATOZ700-IS170 #9311422 待售

Injection molding machine Clamping force: 71 (4) Cylinders Direct pressure locking mode Linear slide pillar movement Mold clamping system: Potentiometer Template movement distance: 0.5 mm Die-closing low-pressure Precision measurement method: Detective Corinth column interval: 360 x 360 mm Template size: 580 x 580 mm Maximum template distance: 600 mm Mold opening stroke: 100 mm Finished product thickness: 2.5 times Minimum mold thickness: 150 mm Nozzle head: ϕ3 mm, R10 Maximum injection pressure: 2125 kgf/cm Maximum holding pressure: 2125 kgf/cm Maximum injection speed: 151 mm/s Targeting locating ring Electric heating sections: N2+H3 Maximum heating temperature: 310°C Heating temperature control accuracy: ±1°C Heating time: 20 to 30 minutes Thimble drive mode: Oil pressure Thimble stroke: 100 mm Thimble speed: 697 mm/s Position accuracy of thimble: 0.05 mm Ejection method: Repeated demolding Vibration demolding Screw speed: 320 rpm Screw diameter: 30 mm Screw stroke: 150 mm Theoretical injection capacity: 106 cm³ Injection quality: 111.3 g Injection quality accuracy: 0.2 mm Plasticizing capacity: 106 cc Screw area: 7.07 cm² Plasticizing capacity: 0.6 kg/min Energy consumption: 2.9 Electric heating capacity: 5.3 kW Motor power: 10 kW Noise level: < 80 dB Upper edge: 1.6 Standard equipment: LCD Screen Potentiometer Water collectors (4) In (4) Out Oil temperature control Feed temperature control Male and female mold temperature control Wind support switch Power plug set: 220 V, 30 A x2 Room temperature water: 6-Points Energy saving system: TOSHIBA Servo motor German internal gear pump Less oil leakage concerns Dry cycle time: 2.5 ~ 3.5sec No welded tubing Power supply: 220/380 V, 3-Phase 2014 vintage.