二手 MAZAK Integrex 200-3ST #9054331 待售

Multi-axis CNC turning center Includes: KM Type tooling (Upper turret) Coolant through milling head (Upper turret) Flood coolant lower turret 40 KM-Tool magazine B-Axis index 5 degree (Coupling clamp) Chip conveyor side disposal (hinge type), 40" Auto chuck jaws open / Close(1 Spindle) Operator door interlock with lock-switch Hole chuck B-210: 10" Thru Hole Chuck B-208A615: 8" Thru FDD Unit: 3.5" Y-Axis control Hyd. pressure interlock 213 PSI Thru / Flood coolant upper turret / Thru mill head (71 PSI Lower) B-Axis 0.0001° increment N/A contouring Automatic tool eye chuck open / Close confirm (1 & 2 Spindle) MAZATROL PC-Fusion-CNC 640MT pro CNC Network interface (For LAN & modem) 8” Thru-hole chuck: Main spindle 2nd Spindle: Non-thru cyl PCMCIA Interface: (2) Slots Card bus C-Axis: 1st Spindle: 0.0001° Increment 2nd Spindle: 0.0001° Increment Coolant through milling head B-Axis: Index 5°(Coupling clamp) Drum turret: Lower 9 position Automatic tool eye Parts catcher Chip blaster Maximum swing: 26" Maximum swing over carriage: 19.7" - 26" Maximum cutting diameter: Chucking 26" Maximum cutting length: 40" Maximum distance between chuck faces: 41.14" Main spindle (L): Spindle nose: A2-6 Spindle bore: 2.99" Maximum bar work: 2" Spindle speed / Ranges: 35-5000 RPM/2 Spindle index (programmable): 0.0001º Spindle horsepower (Cont./30 min): 20/30 HP (A.C.) Spindle torque 258.1 ft-lbs Second spindle (R): Spindle nose: A2-6 Spindle bore 2.99" Maximum bar work: 2" x 34.6" Deep from chuck face Spindle speed / Ranges: 35-5000 RPM/2 Spindle index (programmable) 0.001° Spindle horsepower (Cont./30 min): 20/25 HP(A.C.) Spindle torque: 241 ft-lbs Upper turret and tooling: Type of turret 1 position, with ATC Magazine capacity: 40 Tools Tool selection method: Random Maximum tool diameter with all pockets full: 3.54" Maximum tool diameter with adjacent pockets empty: 4.92" Maximum tool length (From gage-line): 11.8" Rotary tool spindle speed / Ranges: 12,000 RPM/1 Rotary tool spindle horsepower (20% ED): 20 HP (A.C.) Rotary tool torque (20% ED): 88.2 ft-lbs Lower turret and tooling: Type of turret: Drum Tool shank height: 1.0" x 1.0" Tool size (Boring bar maximum diameter): 1.25" Total number of tools: 9 Tool selection method: Bi-directional Tool Index time (1 step): 0.14 Seconds Axis travels: B-Axis: 225° (.0001° increments) Y-Axis: +/- 3.15" X-Axis: 22.83" Z-Axis: 41.1" X2 Axis lower: 5.9" Z2 Axis lower: 38.98" Second headstock W-axis: 41.34" Axis rapid rates: Y-Axis: 1023 IPM X/X2 / Z/Z2 Axis: 1496 IPM Second headstock W-axis: 1181 IPM C-Axis: 400 RPM 2003 vintage.