二手 MAZAK Integrex 200-IIIS #9296620 待售

Multi-Axis CNC turning center With sub-spindle & Y-Axis Specifications: Maximum swing: 26" Maximum swing over carriage: 19.7"-26" Maximum cutting diameter: Chucking, 26" Maximum cutting length: 40" Maximum distance between standard chuck faces: 41.14" Main spindle specifications (L): Spindle nose: A2-6 Spindle bore: 2.99" Maximum bar work: 2" Spindle speed / Ranges: 35 - 5,000 RPM / 2 Spindle index (Programmable): 0.0001° Spindle horsepower (Cont./30 Mins.): 20/30 H.P. (A.C.) Spindle torque: 258.1 ft-lbs Second spindle specifications (R): Spindle nose: A2-6 Spindle bore: 2.99" Maximum bar work: 2" Spindle speed / Ranges: 35 - 5,000 RPM / 2 Spindle index (Programmable): 0.0001° C-Axis Spindle horsepower (Cont./30 min): 20/25 HP (A.C.) Spindle torque: 241 ft-lbs Turret and tooling specifications: Type of turret: 1 Position, with ATC Tool shank height: 1.0" Tool size (Boring bar max. dia.): 1.5" Magazine capacity: 40 Tools Tool selection method: Random Tool to tool ATC Time: 1.3 Sec. Max. tool diameter with all pockets full: 3.54" Max. tool diameter with adjacent pockets empty. 4.92" Max. tool length (From gauge-line): 11.8" ATC Tool shank: KM Rotary tool spindle speed / Ranges: 12,000 RPM / 1 Rotary tool spindle horsepower (20% ED). 25 H.P. (A.C.) Rotary tool torque (20% ED): 88.2 ft-lbs Maximum face mill: 4" Maximum end mill: 1.25" Maximum drill: 1.18" Maximum tap: 1-8 UNC Axis travels: B-Axis: 225° (0.001° Increments) Y-Axis: +/- 3.15" X-Axis: 22.83" Z-Axis: 41.1" Second headstock W-Axis: 41.34" Axis rapid rates: Y-Axis: 1023 IPM X-Axis: 1496 IPM Z-Axis: 1496 IPM Second headstock W-Axis: 1181 IPM C-Axis: 400 RPM General specifications: Floor space (W x L x H): 87.1" x 150.39" x 102.24" Machine weight: 21340 lbs Equipped with: MAZATROL Fusion 640MT PRO Control PCMCIA I/F (2-Slots, card bus) Network interface (For LAN and MODEM) Y-Axis control Coolant through milling head Flood coolant: 213 PSI Through C-Axis: 0.0001° (1st Spindle) 2nd Spindle C-axis: 0.001° Tool magazine: 40 KM B-Axis: 0.0001° Increment N/A contouring B-Axis: Index 5° (Coupling clamp) Chip conveyor side disposal (Consep) Automatic tool eye Auto chuck jaws open / Close (1 and 2 Spindle) Chuck open / Close confirm (1 and 2 Spindle) Auto power ON / OFF + Warm up Coolant temperature control Shower coolant: 38 PSI / 16 Gal Through hole chuck B-208A615 (1st Spindle) through hole cyl S1552, 8" Chuck B-208 2nd spindle with non-through hole cyl. Y-1225, 8" 2004 vintage.