二手 ASM IDEALmold R2R #9366920 待售
网址复制成功!
ID: 9366920
优质的: 2007
Auto molding systems
Type: Electro mechanical low ram movement
With 4-mechanical points
Frequency: 50-60 Hz
Phase: 3 Phase, 4-Wire
Average power: 10 kW
Peak power:18 kW
Air consumption: 500 l/min
Air pressure: 5 to 7 Bar
Vacuum capacity: 2.2 kW
Operating condition:
Operating temperature: 0 to 40°C
Operating Humidity (RH): < 80%
Mains voltage: 480 / 440 / 415 / 380 / 220 / 208 VAC
Press:
Force misalignment 4-Columns: < ± 5 % (Mean value)
Clamping force repeatability: < ± 1 % FS
Clamping force absolute accuracy: ±1 Metric tons ( test report )
Soft clamp capability: 155 x 50 x 0.1 mm
Lower platen full stroke:176 mm ( including 6mm ejection )
Daylight: 646 mm
Minimum mold closing and lock time:1.4 sec (5-165 stroke)
Minimum mold opening time: 1.4 sec (5-165 stroke)
Low speed closing: 1 mm/sec
Low speed opening: 1 mm/sec
Position repeatability: ± 0.1 mm
Parallelism of mold platen: < ± 0.05 mm
Straightness of mold platen: < ± 0.03 mm
Deformation of mold platen: < 0.0254 mm / 305 mm span
Feedback method: Incremental encoder on motor AXIS
Transfer:
Transfer force: 3 Metric tons (Max)
Transfer force accuracy: ± 50 kg
Transfer force repeatability: < ± 1 % F.S
Transfer operating stroke: 85 mm
Position repeatability: ± 0.05 mm
Operating speed: 0~15 mm / sec with 10 step control
Speed accuracy: ± 0.25 mm / sec
Position sensor control incremental encoder
Force detector control load cell sensing device
Ejector:
Ejector force: 2 Metric tons
Ejector operating stroke: 3.25 ± 0.05 mm
Protruding height difference: < ± 0.05 mm
Maximum ejector stroke mold protection: 3.8 mm
Control:
Control box: EMC Type
Power supply Main: AC 200 / 220 V ± 10 %, 50/60 Hz, 3 phase
Control: AC 200 / 220 ± 10 %, 50/60 Hz, Single phase
Interface:
Molding data / Monitor data: RS-422C
Input signal: Direct input (ASM to SHI)
DC24V, (24) ports
Output signal: Direct output (SHI to ASM)
DC24V, (16) ports
Miscellaneous:
Acoustics noise level: < 80 dBA
Life time: > 2 x 106 Cycles
2007 vintage.
ASM IDEALmold R2R是一种卷对卷包装设备,旨在提高食品饮料行业包装工艺的效率和精度。它是一种自动化的解决方桉,能够以高速、精确的方式包装袋装、谷物盒、饮料纸箱等产品。该系统由卷轴支架、主轴驱动器、分配器、运输轨道和产品进料单元组成。卷轴支架支撑着两个或三个不同的卷轴,在该卷轴上可以用细腻的塑料薄膜预先层压材料网。然后,将这个网拆开到一个主轴驱动器上,该主轴驱动器由两个伺服驱动的轴组成,这些轴允许以最小的网张力对材料进行高精度、快速的松开。然后使用分配器模块来精确控制将产品盒或袋子分发到运输轨道上的过程。操作完全自动化,然后通过ABB机器人沿轨道移动产品,该机器人能够操纵各种大小和形状的袋子和箱子。然后产品到达由定向站和表单填充密封装置组成的产品进料机。定向站确保产品正确定位在轨道上,并在送至加油站前正确密封。表单填充密封装置由数字计算机控制,能够监控和调节食品饮料行业完美包装所需的参数。然后可以将打包的产品发送给后续的过程,如装箱、包装和标签。总之,ASM IDEALMOLD-R2R是食品饮料行业可靠、经济高效的包装解决方桉。它是一种全自动工具,能够快速、精确地包装产品,最小网络张力。资产不仅提高了效率,而且还有助于优化包装过程,确保产品的质量和可靠性。
还没有评论