二手 NSW AUTOMATION i-DR S320A #9397400 待售

Dispensing system Size: W533 - D630 - H642 50 ~ 70 Base material: Aluminum Industry PC 3-Axis stepper motor robot Adaptable dispense head Dispensable area coverage (mm): X240 - Y265 Service station Camera Valve and height sensor X, Y Transmission: Full closed-loop rolled ball screw drive Z Transmission Method: Full closed-loop precision ground screw drive Primary X, Y encoder: 8μm / Step rotary type Primary Z encoder: 8μm / Step rotary type Primary X, Y resolution: 10 µm Primary Z resolution: 10 µm Primary X, Y accuracy: ± 20 µm Primary Z accuracy: ± 20 µm Primary X, Y repeatability: ±10 µm Primary Z repeatability: ±10 µm Primary X, Y speed (Peak): 500mm/sec Primary Z speed (Peak): 500 mm/sec Dispensing levelness: ≥50 µm Support smallest dispensed size: ≥150 µm Transfer method: Manual - flat work table Optional: Vacuum chuck function with sensor Board heater function Height scanning function: Standard linearity: < ±12 µm Needle monitoring function Line-scan camera mapping function Fluid level sensor 2D Barcode scanner Vacuum chuck function with sensor Board heater function: 100°C Maximum Vision: Built-in / Resolution / 808 x 608 Pixels FOB / 4.5 x 3.5 mm Needle height Needle cleaning function Pre-purge / Dispense function Volumetric pump: (PistonPRO 4+) Auger pump (Heli master 3) Squeezing pump (Synchro pulse) Piezo jetting pump: (MDS 3280 / MDS 1560) Time pressure system 3rd Party pump's integration Air supply: 5 ~ 6 Bar (70 ~ 87 psi): 0.5 cfm Power supply: 100~240 VAC, Single phase, 50/60 Hz, 0.70 kVA, 13 A.