二手 SPEEDLINE / CAMALOT 3800 #9159943 待售

Dispenser Auto vision alignment Automatic Z-height sensors Automatic needle calibration station With CAMALOT pumps Point-to-point movement Input / Output zones Quick changeover time Systems dispense: (25000) dots of solder paste Advanced motion control: Independent acceleration and deceleration Dispensing head Dispense area for 3800: 14" x 14" (356mm x 356mm) Mechanical specification: 3800 System: Max Z travel: 2.0" (50.8mm) Resolution: 0.0005" (12.5 microns) Max X, Y axis speed: 16 in./sec (406mm/sec) Acoustic noise: 68 DBA Drive system: High speed precision ball screw drives DC Servo motors with closed loop motion control in X, Y and Z Conveyor specification: Belt conveyor with manual or auto Adjustable width with input and output buffers Complies with SMEMA standards Conveyor clearance: 1.56" (1" top / 0.56" bottom) (25mm top / 14mm bottom) 3800 System: Conveyor lift: 14" x 14" (355.6mm x 355.6mm) With vacuum support pins Dispensing: Dot placement accuracy: ±0.003" @ 3 sigma (75 microns) Dispensing method: Positive displacement pump and / or time pressure Typical applications: Surface mount adhesive Solder paste Solder mask Conductive adhesive Dispensing rate: 25,000 Dots/hr Center: 0.125" (3mm) Diameter dot: 0.020" (0.5mm) Computer: Windows Computer: IBM Compatible PC Program method: Teach mode with trackball, download from CAD Facility requirements: Power requirements: 115 Volts, 60 Hz, 1 Phase, 10 Amps International: 220 Volts, 50 Hz, 1 Phase, 10 Amps Pneumatic requirements: Min 80 PSI, 1CFM, 10 Micron filtered air Environmental conditions temperature: 66°F (19°C) to 90°F (32°C) Humidity: 30-70% MTBF: 2000 Hours MTTR: 30 Minutes typical 1995 vintage.