二手 HUETTINGER TruPlasma RF 1003 #9114482 待售

HUETTINGER TruPlasma RF 1003
ID: 9114482
High frequency power supply 13.56 MHz RF Output: Full rated power into 50 Ohm 3000 W Nominal power range 10 - 3000 W Selectable power range 1 - 3000 W Output power (incident) at VSWR 1.1: 1 100 % of full rated power Output power (incident) at VSWR 1.5: 1 95 % of full rated power Output power (incident) at VSWR 2: 1 66 % of full rated power Output power (incident) at VSWR 3: 1 50 % of full rated power Output power (incident) at infinite VSWR >= 20 % of full rated power Reflected power limit 600 W Operating frequency 13.56 MHz ± 0.005 % Nominal load impedance 50 Ohm Harmonic signals at full rated output power into 50 Ohm non-reactive load: < -40 dBc Spurious signals at full rated output power into 50 Ohm non-reactive load: < -50 dBc Connector 7/16 female RF Out accuracy CW for digital control: Power measurement (Compatibility with other frequencies) Power detection (Forward and reflected) <= -26 dB at frequencies above 27.0 MHz, <= -26 dB at frequencies below 7.0 MHz Power accuracy into 50 Ohm (typ.) ± 0.8 W or ± 1 % of set point Fluctuation (Short term stability within 60 s observation time) into 50 Ohm at 1000 W (typ.) ± 1 W Drift (long term stability during continuous 30 minutes of operation) into 50 Ohm at 1000 W (typ.) ± 1 W Power repeatability into 50 Ohm for same generator (typ.) ± 0.8 W or ± 0.8 % of set point Power repeatability into 50 Ohm generator to generator (typ.) ± 0.8 W or ± 1 % of set point Power rise time for 10 to 90 % of full power < 50 ms Power rise time for delta 200 W < 10 ms Turn off time (RF off) from 100 % to 1% of full power: 10 μs Overshoot < 2 % of set point Set point response time from end of command to 90 % of set point: < 100 ms, < 15 ms (typ.) Boot time < 5 s Relative phase shift (between clock input and RF output): 0 – 360° Phase shift resolution 0.1° Pulse frequency: 10 Hz to 50 kHz Duty cycle: 1 to 99 % Min. pulse on time: 10 μs Min. pulse off time: 10 μs Pulse rise time: < 1 μs Pulse fall time: < 1 μs Power overshoot: < 10 % Power: 200 / 208 VAC ± 10 %, 3 Phase and ground, 50/60 Hz Auto frequency tuning (13.56 MHz ±.05 %) Arc management, Dnet 3kW, 13.56MHz Ultra-wide mains 200-480VAC 3-Phase, 10Hz - 50 kHz Pulse mode HN Connection, RS-232/RS-485.
HUETTINGER TruPlasma RF 1003是为等离子体应用而设计的高度可靠、高性能的射频电源。该电源采用高效电路设计,可提供高达1000W的功率输出。这是焊接、塑料焊接、激光蚀刻等应用的完美电源。TruPlasma RF 1003是一种变频电源,可在0.1MHz和30MHz之间进行调节,频率精度为+/-10kHz。它具有200-240VAC的高输入电压范围,可以接受高达400V的峰值输入电压。该电源具有良好的+/-10V电压调节和+/-2.5A电流调节。HUETTINGER TruPlasma RF 1003内置数字显示屏,具有可调功率级别,可帮助您获得所需的精确输出。数字显示屏还允许您轻松调整频率和其他设置,而无需打开电源。TruPlasma RF 1003内置了多项安全功能,如过压保护、过流保护,以及在电源开始过热时立即关闭电源的恒温器。此外,此电源还利用动态负载调节系统,即使负载发生变化,也能保持输出功率稳定。HUETTINGER TruPlasma RF 1003还附带了包括RS 232、RS485和Profinet在内的多种接口选项。这使您可以更好地控制电源,并有助于确保您拥有应用程序所需的输出。总体而言,TruPlasma RF 1003是一款功能强大且可靠的电源,非常适合等离子体应用。高功率输出、变频、出色的电压和电流调节、安全特性以及各种接口使其成为寻求可靠、高品质性能者的理想解决方桉。
还没有评论