二手 MICROMANIPULATOR 6200 #163139 待售

Wafer probe station, 6" Includes B&L Micro Zoom (7) optics (20-140X), 6" chuck, 6x6" travel, manual movement Accepts 10 or more magnetic or vacuum based manipulators 1 in. (25.4 mm) thick honeycomb construction for maximum stability Fine Lift Control True planar vertical motion, convenient knob control Resolution: 0.3 micron per degree revolution Range: 0.5 in. (12.7 mm) Fast Lift Control Raises platen and microscope with adjustable microscope lift delay Range: 1.35 in. (34.3 mm) Three locking up positions Resolution: 18:1 reduction (handle:platen) XY STAGE Stage Movement Range of motion 6 in. x 6 in. (152 mm x 152 mm) Movement and vacuum stage planarity permanently set at factory Theta rotation control full 360° with conveniently located locking knob Control knobs coaxial X-Y for single hand operation from either side, located center front Vacuum Stage Standard 5 in. (127 mm) diameter with dual tweezer slots Gold plated brass for low contact resistance Flatness t.0005 in. (t 12 microns) Electrical isolation exceeds 5000 megohms at 500VDC OPTIONAL SOCKET STAGE Conversion time vacuum to socket and back to vacuum stage less than 60 seconds Accepts P.C. cards with ZIF sockets for probing packaged devices while operating Locking handle for theta rotation control MICROSCOPE AND POST Vertical positioning +1.4 in. ( support) Vertical motion 0 -1.35 in. (34.3 mm) by platen fast lift handle or fine control knob with adjustable delay X-Y translation: 1 in. x 1 in. (25.4 mm x 25.4 mm) with convenient knob control Factory planarized X-Y translation Coarse/fine focus control Microscope B&L MicroZoom with 2:1 zoom in body 3 long working distance objectives (2.25X, 8X, 25X) Quadruple nosepiece accepts optional 50X objective Trinocular head with camera port, 10X eyepieces Coaxial illuminator with system mounted transformer and infinite rheostat control.