二手 DISCO DAD 340 #293593232 待售

Dicing saw, 8" Cutting section: X-Axis: AC Servo motor driven ball-bearing lead screw drive Stroke: 445 mm (Maximum) Cutting range: 163 mm² Work piece width setting range: Up to 8" Cutting speed: 0.1 to 400 mm/s Travelling speed: 400 mm/s (Maximum) Y-Axis: Pulse motor driven ball-bearing lead screw drive Stroke: 210 mm (Maximum) Cutting range: 105 mm² Work piece width: Up to 8" Index range: 0.0001 mm to 203.2 mm Index speed: 25 mm/s (Maximum) Scale resolution: 0.1 µm Z-Axis: For 800 W spindle version: Pulse motor driven ball-bearing lead screw Stroke: 40 mm (Maximum) Traveling stroke: 33.6 mm (Maximum) / 20.9 mm (Minimum) Minimum step: 1 µm For 2200 W spindle version: Pulse motor driven ball-bearing lead screw Stroke: 40 mm (Maximum) Traveling stroke: 31.9 mm (Maximum) / 19.2 mm (Minimum) Minimum step: 1 µm Θ-Axis: Direct-drive motor Rotation angle: 330° (-100° to +230°) (Maximum) Minimum step: 2.0 s Indexing method: Direct-drive motor based closed-loop system Spindle section: For 800 W spindle version: Mechanism: High-frequency built-in motor air-bearing system Rotating speed: 7200 rpm to 60000 rpm Blade: Hub type blade, φ2" (Compatible with M-flange type) For 2200 W spindle version: Mechanism: High-frequency built-in motor air-bearing system Rotating speed: 3000 rpm to 30000 rpm Blade: Hub type blade, φ3" (Compatible with L2-flange type) Water drainage: Connection port: Duct hose, 32 mm Duct: Capacity: 1.5 m³/min Connection port: Duct hose, 75 mm Torque wrench: MOELN010 Torque driver MOELN011 Hexagonal bit (2) LAA076A-0000 Carbon brush assembly, 800 W / 2200 W Duct hose: MSTDH32T Nominal diameter: 32.2 m MSTDH75T Nominal diameter: 75.2 m Pipe band: (2) MSBAK-1035: 32-35 (2) MSBAK-1080: 75:80 Fuse: APG00001A250 Glass, 250 VAC, 1 A APPL475L7.5A Alarm, 7.5 A APSP435L3.5A Alarm, 3.5 A APSP430L Alarm, 3 A APSP410L-1A Alarm, 1 A MODDN005-G Universal chuck table, 6" AQLM-100 Halogen lamp, 12 V, 100 W Instruction manual included.